• 
    <ul id="auswy"><sup id="auswy"></sup></ul>
  • <ul id="auswy"></ul>
    ABB
    關注中國自動化產業發展的先行者!
    CAIAC 2025
    2025工業安全大會
    OICT公益講堂
    當前位置:首頁 >> 案例 >> 案例首頁

    案例頻道

    DCS系統中幾種常見溫度信號處理方式
    • 企業:     領域:DCS/FCS/SCADA     行業:電力    
    • 點擊數:1934     發布時間:2020-08-03 09:50:19
    • 分享到:

    作者:李海洋(1983-),男,江蘇徐州人,工程師,本科,現就職于徐州華潤電力有限公司,研究方向為熱工控制技術。

    摘要:溫度是發電廠中監測設備狀態的重要參數之一,涵蓋從系統到設備的每個角落。隨著DCS系統的廣泛應用,溫度參數不再僅僅局限于監視,已被廣泛運用到保護回路和自動調節回路中。本文結合電廠實際情況,介紹如何利用DCS系統的強大計算和邏輯判斷能力,對溫度拒動和誤動邏輯做出更合理的設計,實現溫度保護、溫度連續預測等功能。

    關鍵詞:DCS;溫度保護

    Abstract: Temperature is one of the important parameters to monitorequipment status in power plant, covering every corner from systemto equipment. With the wide application of DCS system, temperatureparameters are not only limited to monitoring, but also widely usedin protection circuit and automatic regulation circuit. Based on theactual situation of power plant, this paper introduces how to use thepowerful calculation and logic judgment ability of DCS system to makea more reasonable design for the logic of temperature misoperation andmisoperation, so as to realize the functions of temperature protectionand continuous temperature prediction.

    Key words: DCS; Temperature protection

    在線預覽:DCS系統中幾種常見溫度信號處理方式

    摘自《自動化博覽》2020年7月刊

    熱點新聞

    推薦產品

    x
    • 在線反饋
    1.我有以下需求:



    2.詳細的需求:
    姓名:
    單位:
    電話:
    郵件: